text stringlengths 318 2.71k |
|---|
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the Nmfaf_3daDataManagement_Deconfigure service operation?
option 1: To configure the MFAF to map data or analytics received by the MFAF to out-bound notif... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
How does a supporting UE attach to the same core network operator from which it detached in a shared network?
option 1: It requests the core network node to remember its previous... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When can the setting of the Privacy exception list be changed?
option 1: Never
option 2: Only during emergency services
option 3: Anytime
option 4: Only with operator permission
... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the NEF notify to the AF after determining the suitable DNAI(s)?
option 1: AF Identifier
option 2: EAS address information
option 3: DNN
option 4: DNAI(s) or the update... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
In online charging, how are chargeable events transformed into charging events?
option 1: By the CTF
option 2: By the OCF
option 3: By the CGF
option 4: By the CHF
### Response: ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the purpose of the PSFCH channel in NR V2X sidelink?
option 1: To transmit Uplink and Downlink V2X messages
option 2: To transmit HARQ feedback for unicast and groupcast
option... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
Which feature proposes to integrate selected WLAN direct discovery technologies as an alternative technology for ProSe Direct Discovery?
option 1: Unlicensed Spectrum Offloading System... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When can there be two N3 tunnel terminations at the RAN for a PDU Session?
option 1: When there are multiple PDU Session Ids for the PDU Session
option 2: When the QoS Flows of t... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
Which NGAP procedure is used for inter-system load balancing?
option 1: eNB Configuration Transfer
option 2: Downlink RAN Configuration Transfer
option 3: Uplink RAN Configuration Tran... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the Validity Period for predictions?
option 1: To indicate the area of interest
option 2: To provide the Target of Analytics Reporting
option 3: To determi... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the purpose of the MCImp-MC_ARCH work item?
option 1: To specify a common functional architecture for MCVideo
option 2: To specify a common functional architecture for MCData
o... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What should the UE consider if it cannot detect any cell meeting the S criterion on a frequency for sidelink operation?
option 1: Out-of-coverage for sidelink operation on that f... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the Member UE selection assistance functionality hosted by NEF?
option 1: To provide filtering criteria for AF's inputs
option 2: To collect corresponding ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When does the AMF enable or disable the 5G access stratum time distribution for a UE?
option 1: When UE is in CM-REJECTED state
option 2: When UE is in CM-IDLE state
option 3: Wh... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When can target UEs be positioned for lawful interception services?
option 1: Only if the target UE user authorizes it
option 2: Only if the privacy attribute value allows positi... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What are DCI formats with CRC scrambled by MCCH-RNTI or G-RNTI referred to as?
option 1: Multicast DCI formats
option 2: Broadcast DCI formats
option 3: Unicast DCI formats
optio... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What kind of access can enterprise UEs have to non-public networks?
option 1: Access to the non-public network of the enterprise only
option 2: Access to both a non-public networ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the TRP Measurement Grid?
option 1: To calculate the CDF of the EIRP/EIS distribution in 3D
option 2: To determine the total power radiated by the DUT in t... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What action is necessary to get access to services in Idle mode?
option 1: Camping on a cell
option 2: Performing location registration
option 3: Performing CN type selection
opt... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
How does EC-GSM-IoT improve coverage performance for Cellular IoT devices?
option 1: By increasing the transmit power
option 2: By reducing the MS complexity
option 3: By using modifie... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What triggers the NF/NF Service Context Transfer Push procedure?
option 1: The Target NF/NF Service receiving a notification about the decommissioning
option 2: The Source NF inf... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
Which 5G vertical domain is the maritime domain a part of?
option 1: Public safety domain
option 2: Automotive domain
option 3: Factory automation domain
option 4: Satellite industrial... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the User Configuration mechanism in the IMS Multimedia Telephony service?
option 1: To support synchronization of communication logs between multiple devic... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of packet buffering in Edge Relocation?
option 1: To prevent packet loss during EAS migration
option 2: To optimize user plane latency
option 3: To enable sim... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What does the Multi-Identity (MiD) service enable?
option 1: A user to use different UEs registered under different public user identities
option 2: A user to use different identities ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the maximum number of PDU Sessions?
option 1: 128
option 2: 32
option 3: 8
option 4: 256
option 5: 64
### Response:
option 4: 256
explanation :The maximum number of PDU ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which identity is used for indication of pre-emption in the downlink?
option 1: C-RNTI
option 2: CI-RNTI
option 3: CS-RNTI
option 4: INT-RNTI
option 5: P-RNTI
### Response:
opti... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the group identifier called 'External Group ID'?
option 1: To identify individual UEs within a group
option 2: To resolve the group ID to individual UE ID
... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When can the V-SMF delete the DNS context from the selected V-EASDF?
option 1: When the request for HR-SBO is not authorized
option 2: When the V-SMF selects a new V-EASDF
option... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does a UE determine when selecting a power for an S-SS/PSBCH block transmission occasion?
option 1: Value of dl-P0-PSBCH-r16
option 2: Value of dl-Alpha-PSBCH
option 3: Numb... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is supported in enhanced TTI bundling compared to Rel-13 CE mode A in eMTC?
option 1: UL asynchronous HARQ transmission
option 2: Different repetition levels of scheduled PUSCH
op... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the MasterInformationBlockSidelink message?
option 1: To request UE sidelink capabilities
option 2: To indicate the failure of a PC5 RRC AS reconfiguration... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the indication used to invoke the terminal application in the peer end of a multimedia call?
option 1: H.243 information
option 2: H.223 and H.245 information
option 3: C... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the role of the bearer control function?
option 1: To provide interfaces for supplementary services
option 2: To define the characteristics of bearers
option 3: To assign... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of interworking between a 5G core network and an EPC?
option 1: To support home network provided data connectivity
option 2: To preserve IP address for PS ser... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What does the Relaxed monitoring for cell reselection feature in NB-IoT allow the UE to do?
option 1: Avoid monitoring neighbouring cells for 24 hours in stationary or non-changing net... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What happens during session termination in online charging?
option 1: The resource usage is debited from the subscriber account immediately
option 2: The network element sends an... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Can any party in a multiparty call undergo voice call continuity?
option 1: Yes, any party in a multiparty call can undergo voice call continuity
option 2: No, only the calling p... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is covered by enhanced application layer support for V2X services?
option 1: PC5 radio resource control
option 2: Advanced V2X services
option 3: SDAP layer enhancements
option 4:... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the purpose of the UE Capability Management Function (UCMF)?
option 1: To store UE radio capability IDs
option 2: To assign UE radio capability IDs
option 3: To provision UE ra... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
How does a non-supporting UE select a core network operator to serve it in a shared network?
option 1: The UE selects an operator from the available CN operators.
option 2: The s... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
For PSFCH transmission with HARQ-ACK information, how are the PRBs allocated?
option 1: In an ascending order of the PRB index only
option 2: In an ascending order of the cyclic ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What determines the energy detection threshold in channel access procedures?
option 1: The maximum eNB/gNB output power in dBm for the channel
option 2: The single channel bandwi... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What does the Load-Balancing steering mode do?
option 1: Splits the traffic of a data flow across 3GPP and non-3GPP accesses
option 2: Balances the load on the core network nodes
optio... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the home environment need to provide to the visited network when allowing a subscriber to roam to different domains?
option 1: Service data
option 2: Authentication dat... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does VarConnEstFailReportList include?
option 1: Information about connection resume successes
option 2: Information about connection establishment successes
option 3: Infor... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which interface is used to transfer short messages between the SGSN and SMS-GMSC/SMS-IWMSC?
option 1: Gn/Gp-interface
option 2: Gr-interface
option 3: Gs-interface
option 4: Gb-i... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the RRC protocol offer to upper layers?
option 1: Broadcast of common control information
option 2: Notification of UEs in RRC_IDLE
option 3: Transfer of dedicated sign... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is SIPTO at the Local Network?
option 1: A collocated L-GW in the eNB
option 2: A standalone GW
option 3: A collocated S-GW and L-GW in the eNB
option 4: A collocated MME an... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
In the indirect communication model without delegated discovery, what is the role of the SCP?
option 1: It authorizes the NF service consumer's request
option 2: It selects the N... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When is Paging with Wake Up Signal (WUS) used?
option 1: When the UE is in RRC_INACTIVE state
option 2: When the UE is in RRC_IDLE state
option 3: When the UE detects a PTW
optio... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
In unpaired spectrum operation, when are a DL BWP and an UL BWP linked together?
option 1: When the DL BWP index and the UL BWP index are the same
option 2: When the center frequ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
How is Extended Access Barring supported in shared networks?
option 1: The BSC/RNC/eNodeB configures the UE for access barring.
option 2: The shared network applies access barrin... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What are the peak packet data rates supported by the Evolved Packet System on the radio access bearer?
option 1: 100 Mbps downlink and 50 Mbps uplink
option 2: 50 Mbps downlink a... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is a Personal IoT Network (PIN)?
option 1: A network located within a residence, office or shop that provides connectivity to the 5G network.
option 2: A network owned, inst... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What criteria are considered for network broadcast geographic area coverage management?
option 1: OTT provider request and available network capacity
option 2: OTT provider reque... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the 5G system need to provide for mobile base station relays using 5G connectivity provided by a different MNO?
option 1: Separate network infrastructure for MNO-B to c... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When can a UE apply Type 1 channel access procedures for a UL transmission(s)?
option 1: Before receiving the corresponding capability
option 2: After performing Type 2 channel a... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which power saving scheme achieves power consumption reduction by potentially skipping PDCCH monitoring at subsequent slots of PDSCH/PUSCH transmission?
option 1: Cross-slot sche... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What type of authentication and authorization is required for accessing a 5G VN group?
option 1: No authentication/authorization is required
option 2: Primary 5G VN group authent... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the timing advance command for a TAG indicate?
option 1: Change of synchronization signal transmission timing
option 2: Change of downlink timing relative to the curren... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What can be configured separately for each SPS configuration in LTE?
option 1: The time reference
option 2: The PDCP duplication settings
option 3: The cyclic shift for the UL De... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What are the supported scenarios for MPS for MMTEL voice?
option 1: MPS for MMTEL voice and voice conference calls for an authorized Service User using a UE with an MPS subscript... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the high quality criterion for reporting a PLMN to the NAS in the E-UTRA and NB-IoT case?
option 1: Measured RSRP value greater than or equal to -110 dBm
option 2: Measur... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What power saving gain range is observed for the power saving scheme with UE adaptation to the number of antenna/MIMO layer?
option 1: 3% - 20%
option 2: 6% - 30%
option 3: 15% -... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the SIP Reason header extension work item do?
option 1: Specifies procedures for interworking of eCall over IMS to CS domain
option 2: Introduces password protection fo... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the main objective of intent driven management for service or network management?
option 1: To support monitoring of the progress of file download in a downloading job
option 2... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the RRC buffer size for a UE?
option 1: 45 MB
option 2: 45 KB
option 3: 45 GB
option 4: 45 TB
option 5: 4500 KB
### Response:
option 2: 45 KB
explanation :The RRC buffer... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the ECS provide to the EEC?
option 1: Edge configuration information
option 2: EAS configuration information
option 3: Network capability information
option 4: Applicat... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
Are the MuD and MiD services mutually exclusive?
option 1: Yes, a user can only use either MuD or MiD service at a time
option 2: No, they can both be used at the same time
option 3: N... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What does the feature 'Accessing a list of deferred data communications' enable for the MCData service?
option 1: Sharing the current MCData system defined status
option 2: Real-time u... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What are the enhancements specified for the 3GPP Northbound APIs in Release 16?
option 1: Optimization of APIs
option 2: Handling communication failure cases
option 3: HTTP-based proto... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
Where is the UE Radio Capability ID signaled by the UE?
option 1: Over Uu interface between the UE and the CN
option 2: Within the RAN in handover procedures
option 3: Within the CN
op... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is one of the requirements for interworking between fixed access and Evolved Packet Core?
option 1: Efficient usage of system resources
option 2: Policy management and authe... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
How is the modulation order (Qm) and target code rate (R) determined for PSSCH transmission?
option 1: Based on the DM-RS configuration
option 2: Based on the MCS table
option 3:... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What inputs are required for the Nmfaf_3daDataManagement_Configure service operation?
option 1: Data Consumer or Analytics Consumer Information
option 2: Formatting Instructions,... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What are the enhanced RRM requirements in DRX in connected mode?
option 1: Reduced cell identification delay and measurement period.
option 2: Reduced cell detection delay, measu... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
Which TS specification defines the Proximity-based Services (ProSe) architecture?
option 1: TS 23.401
option 2: TS 23.228
option 3: TS 23.303
option 4: TS 23.468
### Response:
option ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which parameter in SL-TxProfileList-r17 indicates compatibility with DRX?
option 1: spare1
option 2: spare2
option 3: drx-Compatible
option 4: drx-Incompatible
### Response:
opt... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
In the context of pathloss models, what is O2I?
option 1: Over-to-Inaction
option 2: Out-of-Office
option 3: On-to-Infinity
option 4: Outdoor to Indoor
### Response:
option 4: O... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is true about services not mentioned within the interaction clause?
option 1: They have no impact on other supplementary services
option 2: They are mandatory for IMS Multim... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the 5G system need to support for a UE accessing multiple network slices?
option 1: Access to the most suitable network slice in minimum time
option 2: Minimization of ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What QoS characteristics does the MPS system support?
option 1: Specific QoS characteristics for MPS Voice, Video, and Data
option 2: Equal QoS characteristics for all MPS sessio... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What are the key functionalities supported by the common services core in MC services?
option 1: Group management
option 2: User authentication
option 3: Service configurations
option ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the 5G system prevent in terms of privacy for UEs using 5G LAN-type service?
option 1: Sharing of UE's identifying information
option 2: Sharing of UE's IP address
opti... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which 3GPP specification specifies the architecture for enabling Edge Applications in 5GS?
option 1: TS 23.501
option 2: TS 23.502
option 3: TS 23.558
option 4: TS 23.548
### Res... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is associated with a time and/or date setting in the IMS Multimedia Telephony service?
option 1: Media capabilities
option 2: Caller identity verification results
option 3: ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the EAS discovery in the application layer architecture?
option 1: To provide mechanisms for an EEC to discover available EASs
option 2: To provide relevan... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which entities can consume Management Data Analytics Service (MDAS)?
option 1: MnFs, NFs, SON functions, SLS assurance functions, human operators, and AFs
option 2: MnS producers... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which solutions in LTE support configurable reliability and latency combinations?
option 1: Semi-static CFI configuration and PDSCH repetition
option 2: UL SPS repetition and PDC... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What type of frames does the Ethernet transport service need to support?
option 1: IP frames
option 2: TCP frames
option 3: Ethernet frames
option 4: UDP frames
option 5: DNS fra... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the typical connection density in factory automation applications?
option 1: 10 connections per 10 m2
option 2: 1 connection per 100 m3
option 3: 10 connections per km2
o... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the purpose of the Common API Framework (CAPIF) for 3GPP Northbound APIs?
option 1: To define a standard API framework for 3rd party Application Servers
option 2: To handle com... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
How are capability parameters signalled in the corresponding FSs for intra-band contiguous CA?
option 1: Per band
option 2: Per carrier
option 3: Per feature set
option 4: Per bl... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the Enhanced TNL Address Discovery with the X2 GW?
option 1: To route X2AP messages between (H)eNBs
option 2: To detect (H)eNB unavailability
option 3: To ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of providing secure means for communication scheduling information to an NPN in a 5G network?
option 1: To perform network energy saving and network resource ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What are the ThreshServingOffloadWLAN parameters used for?
option 1: To specify the WLAN channel utilization threshold.
option 2: To define the RSRP threshold for traffic steerin... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
For FR2-2 measurement system, what is the minimum channel bandwidth required for modelling multi-path fading in single carrier scenarios?
option 1: 400 MHz
option 2: 200 MHz
opti... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does 5GS act as when integrated with IEEE TSN network?
option 1: Layer 2 Ethernet Bridge
option 2: TSN AF
option 3: DetNet Router
option 4: Transport Network Controller
### ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the scrambling sequence generator initialized with for a PDCCH with the CRC scrambled by G-RNTI in a common search space?
option 1: dataScramblingIdentityPDSCH
option 2: ... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.