id stringlengths 11 14 | original_completion stringlengths 1.32k 4.78k | new_length int64 0 70.5k | input_1 stringlengths 0 1.18k | think_1 stringlengths 0 45.6k | json_1 stringlengths 0 3.02k | input_2 stringlengths 0 37k | think_2 stringlengths 0 41.1k | json_2 stringlengths 0 36.9k | input_3 stringlengths 0 15.1k | think_3 stringlengths 0 31.4k | json_3 stringlengths 0 14.8k | input_4 stringlengths 0 19.9k | think_4 stringlengths 0 45.2k | json_4 stringlengths 0 19.7k |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
en_4_part_0 | <json>
{"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0902]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.6265]},"line_3":{"Start Point":[0.75,0.6265],"End Point":[0.0... | 22,291 | Create a rectangular plate with a thickness. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants a "rectangular plate with a thickness." This translates to a single part with a rectangular sketch that is then extruded.
**parts**: Top-level key to contain the model components.
**part_1**: Defines ... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0902]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.6265]},"line_3":{"Start Point":[0.75,0.6265],"End Point":[0.0,0.6265... | Add a second part, which is a thin rectangular plate oriented perpendicular to the first plate. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "second part, which is a thin rectangular plate oriented perpendicular to the first plate." This means we'll add `part_2` to the existing `part_1`. The description implies a sketch that, when ... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0902]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.6265]},"line_3":{"Start Point":[0.75,0.6265],"End Point":[0.0,0.6265... | Add a third part, which is a rectangular plate positioned above the first plate. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "third part, which is a rectangular plate positioned above the first plate." This means we'll add `part_3` to the existing `part_1` and `part_2`. It's described as a rectangular plate, implyin... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0902]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.6265]},"line_3":{"Start Point":[0.75,0.6265],"End Point":[0.0,0.6265... | Add a fourth part, which consists of three circular holes drilled through the first rectangular plate. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "fourth part, which consists of three circular holes drilled through the first rectangular plate." This means we'll add `part_4` to the existing `part_1`, `part_2`, and `part_3`. "Circular hol... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0902]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.6265]},"line_3":{"Start Point":[0.75,0.6265],"End Point":[0.0,0.6265... |
en_4_part_1 | <json>
{"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.3281,0.0]},"line_2":{"Start Point":[0.3281,0.0],"End Point":[0.3281,0.4219]},"line_3":{"Start Point":[0.3281,0.4219],"End Poin... | 17,488 | Create a rectangular plate with a thickness. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to create a "rectangular plate with a thickness." This translates to a single part with a rectangular sketch that is then extruded.
**parts**: Top-level key to contain the model components.
**part_1**... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.3281,0.0]},"line_2":{"Start Point":[0.3281,0.0],"End Point":[0.3281,0.4219]},"line_3":{"Start Point":[0.3281,0.4219],"End Point":[0.0... | Add a second part, which is a thin rectangular plate positioned above and attached to the edge of the first plate. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "second part, which is a thin rectangular plate positioned above and attached to the edge of the first plate." This means we'll add `part_2` to the existing `part_1`. A thin rectangular plate ... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.3281,0.0]},"line_2":{"Start Point":[0.3281,0.0],"End Point":[0.3281,0.4219]},"line_3":{"Start Point":[0.3281,0.4219],"End Point":[0.0... | Add a third part, which is a small rectangular cutout from the first plate. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "third part, which is a small rectangular cutout from the first plate." This means we'll add `part_3` to the existing `part_1` and `part_2`. A rectangular cutout implies a rectangular sketch t... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.3281,0.0]},"line_2":{"Start Point":[0.3281,0.0],"End Point":[0.3281,0.4219]},"line_3":{"Start Point":[0.3281,0.4219],"End Point":[0.0... | Add a fourth part, which is a small circular boss on the first rectangular plate. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "fourth part, which is a small circular boss on the first rectangular plate." This means we'll add `part_4` to the existing `part_1`, `part_2`, and `part_3`. A circular boss implies a circular... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.3281,0.0]},"line_2":{"Start Point":[0.3281,0.0],"End Point":[0.3281,0.4219]},"line_3":{"Start Point":[0.3281,0.4219],"End Point":[0.0... |
en_4_part_2 | <json>
{"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.5833]},"line_3":{"Start Point":[0.75,0.5833],"End Point":[0.0,... | 19,817 | I want to create a rectangular base. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to create a rectangular base. This implies a single part with a rectangular sketch that is then extruded.
**parts**: Top-level key for all parts.
**part_1**: This will be the first and only part in th... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.5833]},"line_3":{"Start Point":[0.75,0.5833],"End Point":[0.0,0.5833]... | Now, I want to add a thinner, narrower rectangular piece attached to the right edge of the base. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "thinner, narrower rectangular piece attached to the right edge of the base." This will be `part_2`, and it will be a joining operation (cut or new body) that extends from or is placed adjacen... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.5833]},"line_3":{"Start Point":[0.75,0.5833],"End Point":[0.0,0.5833]... | Now, I want to add a triangular cutout from the top face of the base, near the left edge. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "triangular cutout from the top face of the base, near the left edge." This will be `part_3`. The sketch needs to define a triangle, and the extrusion will be a cut operation.
**part_3**: Thi... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.5833]},"line_3":{"Start Point":[0.75,0.5833],"End Point":[0.0,0.5833]... | Finally, I want to create a circular hole through the center of the rectangular base. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to create a "circular hole through the center of the rectangular base". This will be `part_4`. This requires a circular sketch and a cut extrusion.
**part_4**: This will define the circular hole.
**co... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.5833]},"line_3":{"Start Point":[0.75,0.5833],"End Point":[0.0,0.5833]... |
en_4_part_3 | <json>
{"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.2092,0.0474,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.0707,0.0]},"line_2":{"Start Point":[0.0707,0.0],"End Point":[0.0707,0.75]},"line_3":{"Start Point":[0.0707,0.75],"End Po... | 21,933 | I want to create a thin rectangular plate positioned slightly off the origin. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to create a "thin rectangular plate positioned slightly off the origin". This will be `part_1`. It requires a rectangular sketch and an extrusion.
**parts**: Top-level key for all parts.
**part_1**: T... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.2092,0.0474,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.0707,0.0]},"line_2":{"Start Point":[0.0707,0.0],"End Point":[0.0707,0.75]},"line_3":{"Start Point":[0.0707,0.75],"End Point":[0... | I want to add a U-shaped feature on top of the first plate. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "U-shaped feature on top of the first plate". This will be `part_2`. A U-shape can be created by two parallel extrusions with a connecting extrusion or by a single extrusion of a U-shaped prof... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.2092,0.0474,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.0707,0.0]},"line_2":{"Start Point":[0.0707,0.0],"End Point":[0.0707,0.75]},"line_3":{"Start Point":[0.0707,0.75],"End Point":[0... | I want to add another identical U-shaped feature on top of the first one. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add "another identical U-shaped feature on top of the first one". This means `part_3` will be identical in shape and size to `part_2`, but positioned higher. "On top of" implies a Z-axis translation... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.2092,0.0474,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.0707,0.0]},"line_2":{"Start Point":[0.0707,0.0],"End Point":[0.0707,0.75]},"line_3":{"Start Point":[0.0707,0.75],"End Point":[0... | I want to add a supporting beam connecting the two U-shaped features. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "supporting beam connecting the two U-shaped features". This will be `part_4`. This requires a sketch that bridges the gap between `part_2` and `part_3`, and an extrusion. Given that `part_2` ... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.2092,0.0474,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.0707,0.0]},"line_2":{"Start Point":[0.0707,0.0],"End Point":[0.0707,0.75]},"line_3":{"Start Point":[0.0707,0.75],"End Point":[0... |
en_4_part_4 | <json>
{"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0027,0.4982,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.7473,0.0]},"line_2":{"Start Point":[0.7473,0.0],"End Point":[0.7473,0.7473]},"line_3":{"Start Point":[0.7473,0.7473],"En... | 17,266 | Create a square plate. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to create a "square plate". This translates to a single part with a square sketch that is then extruded.
**parts**: Top-level key to contain the model components.
**part_1**: Defines the first part of... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0027,0.4982,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.7473,0.0]},"line_2":{"Start Point":[0.7473,0.0],"End Point":[0.7473,0.7473]},"line_3":{"Start Point":[0.7473,0.7473],"End Point... | Now add a rectangular prism attached to the side of the square plate. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "rectangular prism attached to the side of the square plate". This will be `part_2`. It will be joined to `part_1`.
**parts**: Top-level key to contain the model components.
**part_1**: The e... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0027,0.4982,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.7473,0.0]},"line_2":{"Start Point":[0.7473,0.0],"End Point":[0.7473,0.7473]},"line_3":{"Start Point":[0.7473,0.7473],"End Point... | I want to add a triangular prism that cuts into the existing structure. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "triangular prism that cuts into the existing structure". This will be `part_3`. The operation should be "CutFeatureOperation".
**parts**: Top-level key to contain the model components.
**par... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0027,0.4982,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.7473,0.0]},"line_2":{"Start Point":[0.7473,0.0],"End Point":[0.7473,0.7473]},"line_3":{"Start Point":[0.7473,0.7473],"End Point... | Finally, add a chamfer feature to one of the edges. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "chamfer feature to one of the edges". In the provided JSON, this is represented by `part_4`. A chamfer is typically applied to an edge of an existing solid. The provided `part_4` describes a ... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0027,0.4982,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.7473,0.0]},"line_2":{"Start Point":[0.7473,0.0],"End Point":[0.7473,0.7473]},"line_3":{"Start Point":[0.7473,0.7473],"End Point... |
en_4_part_5 | <json>
{"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.375]},"line_3":{"Start Point":[0.75,0.375],"End Point":[0.0,0.37... | 29,690 | Create a rectangular plate with two circular holes. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to create a "rectangular plate with two circular holes". This will be `part_1`.
**parts**: Top-level key to contain the model components.
**part_1**: Defines the first part of the model.
**coordinate_... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.375]},"line_3":{"Start Point":[0.75,0.375],"End Point":[0.0,0.375]},"li... | Now add a rectangular prism cut out from the first rectangular plate, specifically from the area of the first circular hole. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add a "rectangular prism cut out from the first rectangular plate, specifically from the area of the first circular hole". This will be `part_2`, and the operation should be "CutFeatureOperation". T... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.375]},"line_3":{"Start Point":[0.75,0.375],"End Point":[0.0,0.375]},"li... | I want to cut out two cylindrical shapes from the top surface of the plate, centered around the two existing circular holes. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to "cut out two cylindrical shapes from the top surface of the plate, centered around the two existing circular holes." This will be `part_3`, and the operation should be "CutFeatureOperation". Each cy... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.375]},"line_3":{"Start Point":[0.75,0.375],"End Point":[0.0,0.375]},"li... | Now add two annular features, one centered on each of the original circular holes, with a shallow depth. | Step 1: Reason about the components that will be included in the JSON based on the provided description
The user wants to add "two annular features, one centered on each of the original circular holes, with a shallow depth." This will be `part_4`. Annular features typically involve two concentric circles. The operation... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.375]},"line_3":{"Start Point":[0.75,0.375],"End Point":[0.0,0.375]},"li... |
en_4_part_6 | <json>
{"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.75]},"line_3":{"Start Point":[0.75,0.75],"End Point":[0.0,0.75]}... | 24,421 | Create a square flat plate. | Step 1: Reason about the components that will be included in the JSON based on the provided description
From the requirement "Create a square flat plate.", I will analyze and determine the necessary elements, listing the specific JSON keys.
**parts**: Top-level key to contain the model components.
**part_1**: Defines ... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.75]},"line_3":{"Start Point":[0.75,0.75],"End Point":[0.0,0.75]},"line_... | Now, I want to add a rectangular cutout to the top face of the plate. This cutout should be offset from the edges and have a specific shape with multiple segments. | Step 1: Reason about the components that will be included in the JSON based on the provided description
From the requirement "Now, I want to add a rectangular cutout to the top face of the plate. This cutout should be offset from the edges and have a specific shape with multiple segments.", I will analyze and determine... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.75]},"line_3":{"Start Point":[0.75,0.75],"End Point":[0.0,0.75]},"line_... | I want to add a small rectangular protrusion on one of the side faces of the plate. This protrusion should be centered on the face and extend outwards. | Step 1: Reason about the components that will be included in the JSON based on the provided description
From the requirement "I want to add a small rectangular protrusion on one of the side faces of the plate. This protrusion should be centered on the face and extend outwards.", I will analyze and determine the necessa... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.75]},"line_3":{"Start Point":[0.75,0.75],"End Point":[0.0,0.75]},"line_... | Finally, I want to add a small, oddly shaped feature on another side of the plate. This feature has a somewhat curved base and extends outwards. | Step 1: Reason about the components that will be included in the JSON based on the provided description
From the requirement "Finally, I want to add a small, oddly shaped feature on another side of the plate. This feature has a somewhat curved base and extends outwards.", I will analyze and determine the necessary elem... | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,0.0],"Translation Vector":[0.0,0.0,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.0],"End Point":[0.75,0.0]},"line_2":{"Start Point":[0.75,0.0],"End Point":[0.75,0.75]},"line_3":{"Start Point":[0.75,0.75],"End Point":[0.0,0.75]},"line_... |
en_4_part_7 | <json>
{"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.1296,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.3273],"End Point":[0.1861,0.0017]},"line_2":{"Start Point":[0.1861,0.0017],"End Point":[0.5611,0.0]},"line_3":{"Start Point":[0.5611,0.0],"En... | 19,896 | Create a hexagonal prism shape with rounded corners. | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.1296,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.3273],"End Point":[0.1861,0.0017]},"line_2":{"Start Point":[0.1861,0.0017],"End Point":[0.5611,0.0]},"line_3":{"Start Point":[0.5611,0.0],"End Point... | Now, I want to add a cylindrical cutout through the center of the prism's base. | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.1296,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.3273],"End Point":[0.1861,0.0017]},"line_2":{"Start Point":[0.1861,0.0017],"End Point":[0.5611,0.0]},"line_3":{"Start Point":[0.5611,0.0],"End Point... | I want to add a small rectangular cutout on one of the faces of the prism. | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.1296,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.3273],"End Point":[0.1861,0.0017]},"line_2":{"Start Point":[0.1861,0.0017],"End Point":[0.5611,0.0]},"line_3":{"Start Point":[0.5611,0.0],"End Point... | Lastly, I want to add a small, somewhat complex cutout on another face of the prism. This cutout has a specific profile. | {"parts":{"part_1":{"coordinate_system":{"Euler Angles":[0.0,0.0,-90.0],"Translation Vector":[0.0,0.1296,0.0]},"sketch":{"face_1":{"loop_1":{"line_1":{"Start Point":[0.0,0.3273],"End Point":[0.1861,0.0017]},"line_2":{"Start Point":[0.1861,0.0017],"End Point":[0.5611,0.0]},"line_3":{"Start Point":[0.5611,0.0],"End Point... | ||||
en_4_part_8 | "<json>\n{\"parts\":{\"part_1\":{\"coordinate_system\":{\"Euler Angles\":[0.0,0.0,-90.0],\"Translati(...TRUNCATED) | 17,772 | I want to create a rectangular base plate. | "Step 1: Reason about the components that will be included in the JSON based on the provided descrip(...TRUNCATED) | "{\"parts\":{\"part_1\":{\"coordinate_system\":{\"Euler Angles\":[0.0,0.0,-90.0],\"Translation Vecto(...TRUNCATED) | "Now, I want to add a cut-out shape to the base plate. This shape should be a triangle with a base o(...TRUNCATED) | "Step 1: Reason about the components that will be included in the JSON based on the provided descrip(...TRUNCATED) | "{\"parts\":{\"part_1\":{\"coordinate_system\":{\"Euler Angles\":[0.0,0.0,-90.0],\"Translation Vecto(...TRUNCATED) | "I want to add another cut-out shape, this time a triangle, to the base plate. This triangle should (...TRUNCATED) | "Step 1: Reason about the components that will be included in the JSON based on the provided descrip(...TRUNCATED) | "{\"parts\":{\"part_1\":{\"coordinate_system\":{\"Euler Angles\":[0.0,0.0,-90.0],\"Translation Vecto(...TRUNCATED) | Finally, I want to add a small rectangular cut-out to the base plate, located in a different area. | "Step 1: Reason about the components that will be included in the JSON based on the provided descrip(...TRUNCATED) | "{\"parts\":{\"part_1\":{\"coordinate_system\":{\"Euler Angles\":[0.0,0.0,-90.0],\"Translation Vecto(...TRUNCATED) |
en_4_part_9 | "<json>\n{\"parts\":{\"part_1\":{\"coordinate_system\":{\"Euler Angles\":[0.0,0.0,-90.0],\"Translati(...TRUNCATED) | 18,722 | I want to create a triangular prism. | "Step 1: Reason about the components that will be included in the JSON based on the provided descrip(...TRUNCATED) | "{\"parts\":{\"part_1\":{\"coordinate_system\":{\"Euler Angles\":[0.0,0.0,-90.0],\"Translation Vecto(...TRUNCATED) | I want to add another prism, this time a more complex shape, to be placed next to the first one. | "Step 1: Reason about the components that will be included in the JSON based on the provided descrip(...TRUNCATED) | "{\"parts\":{\"part_1\":{\"coordinate_system\":{\"Euler Angles\":[0.0,0.0,-90.0],\"Translation Vecto(...TRUNCATED) | Now, I want to add a more complex shape with some circular cutouts to the previous part. | "Step 1: Reason about the components that will be included in the JSON based on the provided descrip(...TRUNCATED) | "{\"parts\":{\"part_1\":{\"coordinate_system\":{\"Euler Angles\":[0.0,0.0,-90.0],\"Translation Vecto(...TRUNCATED) | Finally, I want to add another prism with a triangular shape. | "Step 1: Reason about the components that will be included in the JSON based on the provided descrip(...TRUNCATED) | "{\"parts\":{\"part_1\":{\"coordinate_system\":{\"Euler Angles\":[0.0,0.0,-90.0],\"Translation Vecto(...TRUNCATED) |
End of preview. Expand in Data Studio
README.md exists but content is empty.
- Downloads last month
- 7